|
|
AC Drives
|
|
A low cost, compact AC
drive
that is easy
to use and featured
just right for applications
up to 2HP. |
|
| Standard Features
| Optional Features
| Adjustable Features
| Application Data |
| Power Ratings |
Dimension and Weights
| Analog Input Characteristics
|
| Digital
Input Characteristics | Service Conditions
| Instruction Manual
|
| Control
Model Terminal Functions |
The Reliance SP200 provides OEMs and
users with an excellent choice where cost, size, and ease-of-use are the
most important considerations for control of three phase induction motors.
Typical applications include fans, pumps, conveyors and other small
machines where inside panel or inside machine mounting is available.
- Compact
packaging (5.5" H x 2.8" W x 5.5" D) conserves panel space. Panel or DIN
rail mounting without an adapter.
- Robust
out-of-the-box performance and a carefully chosen parameter set make
startups a snap.
- Single
phase input ratings (up to 1.5 HP) operate on 115V or 230V and produce
230 V, three phase output in both cases.
- Three
phase ratings available in both 230V and 460V.
- Feed
through power design for simple wiring of input and output. Also
provides an easy retrofit from constant speed to variable speed.
- Spring
style control terminals for quick and reliable control connections.
- Isolated
0 - 10 V or 4 - 20 mA analog inputs (models A & C) for problem free
analog connections.
- Isolated
digital inputs activated by either the drive's own +10V supply or an
external 24V supply without the use of an interface card.
- Electronic
drive & motor protection with diagnostic fault indication for easy
troubleshooting.
- Finger
safe protected chassis (IP20) reduces contact with dangerous voltages.
- Built-In
MOVs for protection against input voltage transients.
- UL
listed, cUL listed and CE marked for global use.
- Three
different control models to match specific needs:
Model A, Single
Channel Analog: for control from one analog signal or a speed pot
Model B, Preset Speed: for up to 8 specific speeds controlled by 3
on/off digital inputs
Model C, Dual Channel Analog: for applications
that can take advantage of an operation between two analog signals.
Choose from PI, add, or multiply functions.
- Local
Keypad - Provides access to settings and operation. Plugs directly onto
drive for temporary or permanent use.
- CopyCat
Keypad - Handheld device provides quick editing and transfer of settings
to multiple drives (one at a time). Non volatile memory maintains
multiple program sets.
- Remote
Keypad - Provides access to settings and operation from the outside of
an enclosure. Mounts flush to the outside of a panel.
- Input
Mains Filter - Allows compliance with European Union EMC directive.
Piggy-back design requires no extra panel space.
|
Analog Offset & Gain (models A & C)
|
|
Process Operations - PI, add, or multiply (model
C) |
|
8 Preset Speeds (model B) |
|
Minimum and Maximum Speeds (0 - 240 Hz)
|
|
2 Acc & Dec Rates (0 - 600 sec.) |
|
2 & 3 Wire Remote Control Modes |
|
Ramp, Coast, & DC Stop Modes |
|
Automatic Torque Boost |
|
Current Limit |
|
Configurable Input: jog, alternate speed
reference, coast stop, 2nd acc/dec, reverse (model C) |
|
Configurable Output: fault, run, at speed, above
speed, above current |
|
Scaleable Speed Display |
|
V / Hz Settings |
|
Auto Restart (0 - 10 attempts) |
|
Reverse Lockout |
|
Program Password |
|
Avoidance Frequency & Band |
|
Carrier Frequency (2-8 kHz, derating required
> 2 kHz) |
Maximum Load: 150% for 60 seconds, 200% for 10 seconds
Control Ride Through: 100 msec
|
HP (kW)
|
Voltage
|
Input Current
|
Output Current
|
Watts Loss
|
|
0.5
(0.37) |
1 phase
115V or
230V in
3 phase
230V out |
9.4 /
4.7 |
2.3
|
25
|
|
1.0
(0.75) |
17.2 /
8.6 |
4.2
|
45
|
|
1.5
(1.1) |
24.6 /
12.3 |
6.0
|
70
|
|
2.0
(1.5) |
1 phase
230V in
3 phase
230V out |
14.3
|
7.0
|
75
|
|
0.5
(0.37) |
3 phase
230V |
2.7
|
2.3
|
25
|
|
1.0
(0.75) |
5
|
4.2
|
40
|
|
2.0
(1.5) |
8.3
|
7.0
|
70
|
|
0.5
(0.37) |
3 phase
460V |
1.5
|
1.3
|
25
|
|
1.0
(0.75) |
2.4
|
2.0
|
30
|
|
2.0
(1.5) |
4.1
|
3.5
|
50
|
5.5" H x 2.8" W x 5.5" D, 1.1 lbs
Resolution: 8 bit (0.4%)
Impedance: 0 - 10 V input > 100 ![]() K Ohms
4 - 20 mA input ![]() 250 Ohms
Rated voltage (active high): 10 to 24 VDC ± 10%
Load (each): min of 10 mA at 10V, max of 20 mA at 24 V
Maximum off-state level: 2mA / 1.5V
0 to 50° C at 95% relative humidity, non condensing and 3300
ft
AC Input Tolerance: 47 to 63 Hz
115 V Ratings: 100 - 120 VAC ± 10%
230 V Ratings: 200 - 240 VAC ± 10%
460 V Ratings: 380 - 460 VAC ± 10%
Quick Start Guide: D2-3418
Instruction Manual: D2-3408
C ontrol Model Terminal Functions
|
Control Terminal |
Model A Single Channel Analog
|
Model B Preset Speed
|
Model C Dual Channel Analog
|
|
1
|
Shield/
Common |
Shield/
Common |
Shield/
Common |
|
2
|
+ 10 VDC
|
+ 10 VDC
|
+ 10 VDC
|
|
3
|
Function
Loss / Reset |
Function
Loss / Reset |
Configurable Input (Funct. Loss)
|
|
4
|
Forward
Run |
Forward
Run |
Forward
Run |
|
5
|
Reverse
Run |
Reverse
Run |
0 - 10
VDC Analog Input |
Channel
1
|
|
6
|
Configurable Input (Jog) |
Preset
Speed |
4 - 20
mA DC Analog Input |
|
7
|
0 - 10
VDC Analog Input |
Preset
Speed |
Analog
Input Common |
|
8
|
4 - 20
mA DC Analog Input |
Configurable Input
(Preset Speed)
|
0 - 10
VDC Analog Input |
Channel
2
|
|
9
|
Analog
Input Common |
Common
|
4 - 20
mA DC Analog Input |
|
10
|
Relay
N.C. Contact |
Relay
N.C. Contact |
Analog
Input Common |
|
11
|
Relay
Common |
Relay
Common |
Relay
Common |
|
12
|
Relay
N.O. Contact |
Relay
N.O. Contact |
Relay
N.O. Contact |
Document
D-2001
|
Note:
|
This
material is not intended to provide operational instructions.
Appropriate Reliance Electric Industrial Company instruction manuals
and precautions should be studied prior to installation, operation,
or maintenance of equipment.
|
|
Copyright 1998
Rockwell International, Inc.
|
|
|